Axson Technologies F38 Polyurethane Fast Cast Resin - Brilliant impact resistance, low viscosity, almost thermoplastic like finished resin
Low viscosity, unfilled, ideal for thin sections where some semi rigidity would help prevent fracture and snapping. A simple 1:1 by weight mixing ratio with a potlife of 2 minutes and a rapid demould in 20 to 25 minutes only!
*Please note due to density differences, it is by weight NOT by volume. Moisture sensitive and temperature sensitive. Low room temp may inhibit cure or cause other characteristic issues.
Reasonable thermally resistant with an HDT around the 55 Celsius mark. Hardens to 70-72D with complete cure achieved over 72 hours, however this does not mean you cannot demould @ 25 minutes.