A1 Accelerator can be used to reduce the processing time. Always add the A1 Accelerator to the A1 Liquid. Limit the amount of A1 Accelerator used to a maximum of 1% of the total weight. A1 Accelerator can also be used to correct any retarding effects created by some pigments and fillers.
To be used with Acrylic One / A1 resin only
Acrylic One / A1 Accelerator 250g
It is important to weigh and mix A1 very carefully, based on the following mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder. Fill a mixing cup or bucket with the amount of A1 Liquid required. Use the stainless-steel High Shear Mixer to create a swirl and then add the A1 Powder. Stir the mix until smooth and lump-free and then stir for another 30 seconds. Make sure that the material on the bottom and sides of the cup or bucket is mixed in properly too.