A1 Sealer PLUS is a water-based coating that can be used to protect A1 against weather conditions like UV and moisture. A1 Sealer PLUS is a so-called breathable coating. The surface to be sealed must be free of wax, oil, dirt or dust. Apply with a brush, roller, soft cloth or spray it on.
See how to use tab for more information
To be used with Acrylic One / A1 resin only
Acrylic One / A1 - Sealers 250g
If A1 Sealer PLUS is applied with a brush, we advise that water equal to 30% of the total volume is added to the product before using. If applying A1 Sealer PLUS with a brush, it must be rubbed in with a dry cloth while it is still damp. Apply a maximum of 3 layers of A1 Sealer to the A1 object as described above. Each layer can be applied one after the other, with a short drying time of just several minutes between the application of each layer. If applying with a soft cloth, 1 layer of A1 Sealer PLUS will create a satin matt finish. A more gloss finish will be achieved if a number of layers are applied. If applied with a brush, 1kg of A1 Sealer PLUS will cover an area of 8 to 10 m2.
If spray applying A1 Sealer PLUS, we advise customers to add up to 50% water to the A1 Sealer PLUS. As the A1 Sealer PLUS atomises, it is not necessary to polish the object afterwards. If spray applying, 1 kg of A1 Sealer PLUS will cover an area of 10 to 12 m2.
Please visit https://activecomposite.com/Education/Youtube for how to videos and https://activecomposite.com/Education/A1-manual for a detailed manual
Acrylic One base material should be used with A1's Triaxial Fibre.
In addition it can be used with
ATP Powder and Thixotropics to create a gel or paste
Matt, Satin and Gloss sealers for additional protection
Retarder and accelerators to vary the curing times to each project
A1 / Acrylic One can be combined with pigments, powders, thickeners and fibres for a variety of uses.
A1 excels as a hardcoating foam carvings, architectural use, theme and decoration, interior design castings, mold support walls and much more!
As Acrylic one is fire resistant, it is perfect to use as support walls for molds being used in Foundrys.
- Fire resistant because A1 LP01 in relation to its reaction to fire behaviour is classified: B. The additional classification in relation to smoke production is: s1. The additional classification in relation to flaming droplets / particles is: d0.
A1 Base material is a two-component material that consists of a mineral powder and a water-based acrylic resin. A1 base material is best used along with A1 Triaxial Fibre to create a very strong final product be it as a mold support, cast piece or to hard coat a polyfoam carving.
Those who are familiar with Jesmonite will find Acrylic One easy to use.
These components bond to create a very strong material. A1 is environmentally friendly, safe to work with, fire resistant, easy to use and has a fast processing time. Through the use of additional products such as Thixos, powders, pigments, metal powders, retarders/accelerators and more you can adjust the product to your specific needs