A1 ATP Powder is a volume thickener. It makes it possible to thicken A1 to a putty thickness. This putty can be used to give the surface of an object a smooth finish.
We advise that A1 ATP Powder is only used for indoor applications.
To be used with Acrylic One / A1 resin only
Acrylic One / A1 ATP Powder
It is important to weigh and mix A1 very carefully, based on the following mixing ratio: 1 part A1 Liquid to 2 parts A1 Powder. Fill a mixing cup or bucket with the amount of A1 Liquid required. Use the stainless-steel High Shear Mixer to create a swirl and then add the A1 Powder. Stir the mix until smooth and lump-free and then stir for another 30 seconds. Make sure that the material on the bottom and sides of the cup or bucket is mixed in properly too.
Please visit https://activecomposite.com/Education/Youtube for how to videos and https://activecomposite.com/Education/A1-manual for a detailed manual
Acrylic One base material should be used with A1's Triaxial Fibre.
In addition it can be used with
ATP Powder and Thixotropics to create a gel or paste
Matt, Satin and Gloss sealers for additional protection
Retarder and accelerators to vary the curing times to each project
A1 / Acrylic One can be combined with pigments, powders, thickeners and fibres for a variety of uses.
A1 excels as a hardcoating foam carvings, architectural use, theme and decoration, interior design castings, mold support walls and much more!
As Acrylic one is fire resistant, it is perfect to use as support walls for molds being used in Foundrys.
- Fire resistant because A1 LP01 in relation to its reaction to fire behaviour is classified: B. The additional classification in relation to smoke production is: s1. The additional classification in relation to flaming droplets / particles is: d0.
A1 Base material is a two-component material that consists of a mineral powder and a water-based acrylic resin. A1 base material is best used along with A1 Triaxial Fibre to create a very strong final product be it as a mold support, cast piece or to hard coat a polyfoam carving.
Those who are familiar with Jesmonite will find Acrylic One easy to use.
These components bond to create a very strong material. A1 is environmentally friendly, safe to work with, fire resistant, easy to use and has a fast processing time. Through the use of additional products such as Thixos, powders, pigments, metal powders, retarders/accelerators and more you can adjust the product to your specific needs