What is filler primer spray?
Spray Filler, also known as Primer Filler or Spray Putty, is a type of high-density primer used to level, and fill imperfections and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines in 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA Foam.
In cosplay, the spray filler is essential for preparing armor and props before the final paint job, ensuring a smooth and even surface. It is also used on pieces made with 3D printing in PLA, facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.
Thanks to its filling and smoothing capacity, it is an essential product for those seeking professional finishes in the creation of props, miniatures, car and bike repairs, and their helmets, as well as models and detailed pieces in any craft project.
Content: 1x 400ml
How to use filler primer spray?
Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If smooth or glossy, sand lightly with fine sandpaper (400-600) to improve adhesion.
Product Agitation: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at a temperature between 10°C and 25°C and humidity below 65%. Do not apply in windy, extremely cold, or high-humidity conditions.
Spray Application: Hold the spray at a 15-20 cm distance. Apply in thin, uniform coats with smooth, steady strokes. Wait 5-10 minutes between coats before reapplying.
Drying and Finishing: Dry to the touch in 30 minutes. Complete drying in 24 hours. For a more uniform finish, sand lightly before painting.
Spray Cleanup: After use, invert the sprayer and press the valve for a few seconds to clean the nozzle.
WARNINGS
Keep out of children's reach.
Keep away from heat/sparks / open flames / hot surfaces.
Do not spray on an open flame or another source of ignition.
Do not pierce or burn, even after use.
Keep the recipient hermetically sealed.
IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.